Engine oil labels and other lubricant labels may encounter oil, handling and changing storage conditions. We print labels for engine oil and other lubricant containers, selecting the face material, adhesive and finish for the pack. Share the expected exposure so the complete label construction and sample test plan can be reviewed.
Where they are used
- Engine oil bottles, 1 L to 5 L
- Lubricant and grease pails and drums
- Gear oil, hydraulic fluid and coolant packaging
- Aftermarket automotive chemicals
Why synthetic paper
Synthetic paper can provide a printable film face for lubricant packaging. Printing, finish, oil exposure and flexibility should be reviewed for the selected grade and container; test samples on the actual bottle. Where a glossy film look is preferred, BOPP is the alternative from the same line.
Specification
| Facestock | Synthetic paper (standard); BOPP film on request |
| Adhesive | Permanent adhesive selected for the actual HDPE or PP container and application conditions |
| Finish | Varnish or lamination can be considered for surface protection; hot foil and embossing depend on the design and construction |
| Testing | Oil exposure and any required tests are agreed for the project; see our laboratory |
| Minimum order | No fixed minimum label quantity; minimum order value depends on material and production process and is confirmed in the quotation. |
How to trial a label on an HDPE oil bottle
If your bottle is HDPE, use a bottle from the intended filling line and a label made with the proposed face material, adhesive and finish. Keep the same sample ID on the bottle, photos and trial record.
- Before applying the label. Record the bottle resin, panel size, surface condition and application temperature. Note whether the bottle is empty or filled and how it is labelled on the line.
- At application. Photograph the whole panel, then take a close-up of a corner and the nearest curve. Note the application time and the label material or batch reference.
- After handling or oil contact. Agree on the oil, exposure time and handling conditions in advance. Record the elapsed time and photograph the same areas. Check the edges for lifting, the panel for wrinkles and the print for smudging or loss of legibility.
Send the paired photos and observations with your bottle and label references so we can review the proposed construction.
What to send us
Send the container type and material, label size, quantity per design, number of designs, artwork, and whether labels are applied before or after filling. For machine application, include the roll specifications if known. Include the expected oil contact, storage conditions and any sample or test requirements.
Prefer to talk it through? WhatsApp +86 199 5367 7578.